Industrial Intelligent Jet Fan

Product Introduction

Industrial intelligent jet fan , also known as induction fans, transfer air through induction and have a small air volume themselves. They are usually applied in the ventilation systems of garages this kind of public facilities to stir and eliminate the local air of dead zones, thereby improving the local air quality. Industrial jet fans are a new type of fans designed on the basis of the concept of high-speed jet induction ventilation. The ductless induction ventilation subsystem composed of multiple sets of such kind of fans can form an entire ventilation and smoke exhaust system together with air supply fans and air exhaust fans.

Its working principle is that the directional high-speed airflow ejected from the nozzles of multiple properly arranged induction fans as per system design induces outdoor fresh air or treated air, delivering it to the required area without air ducts. This realizes optimal indoor air distribution, efficient ventilation and air exchange effects.

When operating a ductless jet induction ventilation system, the cost can be saved in the fields of design, manufacture, installation of air ducts and other supporting projects. This cost is much higher than value of the induction fans. However, with the complete floor serving as the ventilation duct, the air pressure required by the supply and exhaust fans is much lower than when using ducts. It makes it possible to select ventilation fans with large air volume and low air pressure for reducing the required power and significantly lowering operating costs and investment expenses. When the supply and exhaust fans stop working, the jet fans can still run for local ventilation and air exchange.

The industrial intelligent jet fan is equipped with a pollutant concentration sensing device and a controller on the basis of the induction fan according to users' needs to realize automatic control. When the key control box is in the automatic mode, if the carbon monoxide in the garage is over the standard, the controller will send an alarm signal and automatically output control commands to start a single or multiple induction fans according to the program instructions to exhaust air to reduce the concentration of exhaust gas in a certain zone until it is lower than the preset value. When the carbon monoxide concentration is in standard range, it can automatically stop after the system is reset or be manually stopped. When the control box is in the manual state, the administrator can manually operate the start and stop of the fan according to the current situation of the garage.

When the jet fan is working, if a fire breaks out in the underground garage, the control box can receive the shutdown signal from the fire alarm control cabinet and automatically stop working.

The key controller can be made into two net working forms: wired and wireless. In addition, it can be equipped with functions of a password lock, temperature control, time control, data sampling system, and building intelligent control to meet different users’ requirements.

Product Details

Product Features

Jet fans have built-in high-efficiency centrifugal fans, featuring obvious advantages of low noise, small size, light weight, convenient hoisting (both vertical and horizontal installation are possible), and simple maintenance. They have been widely used for ventilation in large-scale places including underground parking lots, gymnasiums, workshops, warehouses, shopping malls, supermarkets and entertainment venues.

Packing & Shipping

Shunda company adopts a safe packing concept. The foam fillings, plastic films, cartons, plywood cases and etc. are strictly used in products packing. These materials can maintain products from corrosion, humidity, crash and viberation. Our factory has special room and forklifts for loading and discharging to guarantee the security of products and operators. 

Company Profile

Shunda Air Conditioning Equipment Group Co., Ltd. (Shunda for short), founded in 2005, located in Shandong Province of China, is a renowned HVAC manufacturer in China’s. Covering over 70,000 m² areas, with 230 employees, Shunda specializes in HVAC products including modular air conditioners, fan coil units, ventilation fans, fire valves, ductworks and more, over 70 types in total. With ISO9001, ISO14001, ISO18001 certifications and many national honors, Shunda has set up a good reputation under “Jinxin Shunda” brand. In these years, the company has successfully implemented landmark projects in China and abroad including Southeast Asia, Africa and other countries of the world.

Our Service 

Requirement communication and technical consultation

• Shunda's professional engineers are available to answer customers' questions and solve the technical issues.

• Provide customers with product catalogs, technical manuals, installation drawings, performance parameters and operation instructions to ensure that customers can deeply understand the products.

• Work on customized products and implementation schedules for customers according to their specific needs and working conditions to ensure the high-cost performance.

Product display and demonstration

• Invite customers to visit our facotry allowing them to understand the advantages of our products in terms of appearance, structure, material and technology.

• Take use of VR or 3D animation technologies to provide customers with online product display services enabling them to have a comprehensive products understanding.

• Provide customers with relevant data from Shunda's labs or projects so that customers can understand the actual performance of the products. 

Installation and commissioning guidance and technical support

• Provide customers with installation guidance including installation instructions, installation drawings, foundation construction requirements and a list of installation tools to make sure the customers can understand and operate smoothly.

• On-line installation guidance can be provided and the skilled engineers can also be assigned for on-site technical guidance if necessary.

Quality assurance and maintenance

• We provide integrated services including technical support and spare parts services to guarantee a stable performance.

• A round-the-clock after-sales service hotline is available to answer customers' repairing calls.

Periodic follow-up visits and maintenance services

• During quality guarantee period, customers will be visited every 3 months. After  guarantee period, an on-line return visit will be carried out once a year to timely collect their suggestions and problems so as to make constant improvemnt of our products and services.

• Formulate customized maintenance plans for our customers according to the working conditions, products usage and operation time.

Technical training

• Regularly invite customers to take part in online product trainings.

• Set up a technical consultation email box and an online customer services platform to answer questions that customers meet during operation and responses will be given within 24 hrs.

FAQ

Q: Are you a HVAC manufacturer or a HVAC sales agent?

A: We are a leading HVAC manufacturer in Shandong, China with a producing base of over 70,000 m². We have advanced producing and assembling lines for host units of central air-conditioners and accessories, such as fireproof ductworks, louver vents, various valves, fan coil units, air blowers and etc.

Q: Can you accept OEM orders and customized projects?

A: Of course, we can design and produce customized HVAC products and take over customized projects. We have experienced technicians and engineers who can put forward good advices and give optimal solutions according to our customers' requirements.