Industrial Intelligent Induction Fan

Product Introduction

Industrial Intelligent Induction Fan, also known as jet fans, transfer air through induction and have a small air volume themselves. They are usually used in the ventilation systems of garages this kind of public facilities to stir and eliminate the local air of dead zones, thereby improving the local air quality. They are a new type of fan designed on the basis of the idea of high-speed jet induction ventilation. The ductless induction ventilation subsystem composed of multiple sets of such fans can form an entire ventilation and smoke exhaust system together with air supply and exhaust fans.

Its working principle is that the directional high-speed airflow ejected from the nozzles of multiple properly arranged induction fans as per system design induces outdoor fresh air or treated air, delivering it to the required area without air ductworks. This achieves resonable indoor air distribution to attain efficient and economical ventilation and air exchange effects.

When using a ductless jet induction ventilation system, the costs can be saved in the fields of design, manufacture, installation of air ductworks and other supporting projects. These costs saved are much higher than value of the induction fans. Moreover, with the entire floor serving as the ventilation duct, the air pressure required by the supply and exhaust fans is much lower than when using ducts. This makes it possible to select fans with large air volume and low air pressure for reducing the required power and lowering operating costs and investment expenses. When the supply and exhaust fans stop working, the induction fans can still run for air exchange and local ventilation.

The intelligent induction fan is equipped with a pollutant concentration sensing device and a controller on the basis of the induction fan according to users' requirements to realize automatic control. When the control box is in the automatic state, if the carbon monoxide in the garage exceeds the standard, the controller will send an alarm signal and automatically output control commands to start a single or multiple induction fans according to the program instructions to exhaust air to reduce the concentration of exhaust gas in a certain zone until it is lower than the preset value. When the carbon monoxide concentration is normal, it can automatically stop after the system is reset or be manually stopped. When the control box is in the manual state, the administrator can manually operate the start and stop of the fan according to the current situation of the garage.

When the fan is working, if a fire occurs in the underground garage, the control box can receive the shutdown signal from the fire alarm control cabinet and automatically stop running.

The controller can be made into two networking forms: wired and wireless. In addition, it can be equipped with functions of a password lock, data sampling system, temperature control, time period control and building intelligent control to meet different users’ requirements.

Product Details

Product Features

Induction fans have built-in high-efficiency centrifugal fans, featuring obvious advantages of low noise, small size, light weight, convenient hoisting (both vertical and horizontal installation are possible), and simple maintenance. They have been widely used for ventilation in large-scale places including underground parking lots, gymnasiums, workshops, warehouses, shopping malls, supermarkets and entertainment venues.

Packing & Shipping

Shunda adopts a safe-oriented idea of packing. The foam fillings, cartons, plastic films, plywood cases and etc. are used in products packing. These substances can maintain products from humidity, viberation, corrosion and crash. Our manufacturing ares has special room and forklifts for loading to guarantee the security of the operators and products. 

Company Profile

Shunda Air Conditioning Equipment Group Co., Ltd. (Shunda for short), established in 2005, located in Shandong Province, is a famous manufacturer in China’s. Covering over 70,000 m² with 230 employees, including 27 R&D engineers, Shunda specializes in HVAC solutiongs and ventilation products including modular air conditioners, fan coil units, ventilation fans, fire valves, ductworks and more, over 70 types in total. With ISO9001, ISO14001, ISO18001 certifications and various national honors, Shunda has set up a good reputation under its “Jinxin Shunda” brand. The company has successfully implemented landmark projects in China and abroad including Southeast Asia, Africa and Mideast areas and continues to uphold a philosophy of innovation, quality, and service.

Our Service 

Requirement communication and technical consultation

• Shunda's professional engineers and experts are always available to answer customers' technique questions.

• Provide customers with technical manuals, performance parameter tables, product catalogs, installation drawings and operation instructions to ensure that customers deeply understand the products.

• Work on customized products and implementation plans for customers according to their specific needs and actual working conditions to ensure a high-cost performance.

Product display and demonstration

• Invite customers to visit our production base allowing them to understand the characteristics of the products in terms of appearance, structure, material and technology.

• Take use of VR or 3D animation to provide customers with online product display services enabling them to have a good products understanding.

• Provide customers with relevant data of the product performance tests conducted by the company in labs or real projects so that customers can understand the performance of the products. 

Installation and commissioning guidance and technical support

• Provide customers with installation guidance including installation instructions, installation drawings, foundation construction requirements and a list of installation tools to make sure the customer's installers can operate correctly.

• Online installation guidance can be provided and the professional engineer can also be assigned for on-site guidance if necessary.

Quality assurance and maintenance

• We provide integrated services including technical support and spare parts services to ensure long-term performance and reliability.

• A round-the-clock after-sales service hotline is set up to answer customers' repair calls all the time.

Periodic follow-up visits and maintenance services

• During quality guarantee period, customers will be visited every three months. After  guarantee period, an online return visit will be conducted once a year to timely collect their suggestions and opinions to improve products and services.

• Formulate personalized maintenance schedules for customers according to the use of products, operation time and working environment.

Technical training

• Invite customers to take part in online technical training courses.

• Set up a all round technical consultation email and an online customer service system to answer technical questions. For technical questions from customers, responses will be given within 24 hrs.

FAQ

Q: Are you a manufacturer or sales agent?

A: We are a leading manufacturer in Shandong, China with a producing zone of over 70,000 m². We have advanced producing lines for host units of central air-conditioning equipment  and its accessories including fireproof ductworks, ventilation louvers, various dampers, fan coil units, air blowers and etc.

Q: Can you accept OEM orders?

A: Of course, we can design and produce customized ventilation products. We have talent technicians and engineers who can put forward good advices on your drawing.